《通用GM泛亚PATAC车身典型设变问题.ppt》由会员分享，可在线阅读，更多相关《通用GM泛亚PATAC车身典型设变问题.ppt（25页珍藏版）》请在三一办公上搜索。
1、CH031车身典型设变问题及经验教训,5401211/2 左/右B柱上加强板,5401411/2 左/右侧顶梁内板本体,5401271/2 左/右流水槽本体,5101410-G08 后地板梁骨架总成,1.Make the clearance between gun&panel over 5mm,2.Make the clearance between gun tip&panel over 2mm,5101190 前地板中通道总成,5301190-G08 前围板总成,5101230-G08 后地板前段总成,Make the welding surface width over 14mm,5101
2、270/80-G08 左/右后侧梁盖板总成,5101430/40-G08 后地板前横梁左连接板总成,Make the welding surface width over 14mm,5101460-G08 后地板后横梁外板总成,Make the welding surface over 11 mm,More than 15mm(=10mm(interference)+5mm(clearance)is needed.,5101530/40-G08 左/右后侧梁总成,5101020-G08 后地板总成,Make the welding surface width over 14mm,5101020-G08 后地板总成,六、装配间隙问题,例1:5401311/312,例2:8400415,例2:5601121（5601120）,例3:6101131/132,
