《液压剪板机维护保养及维修的方法.doc》由会员分享，可在线阅读，更多相关《液压剪板机维护保养及维修的方法.doc（2页珍藏版）》请在三一办公上搜索。
1、液压剪板机维护保养及维修的方法液压剪板机维护保养及维修的方法：1、严格按照操作规程进行操作。 1, in strict accordance with the procedures.2、每次开机前按润滑图表要求定时、定点、定量加润滑油，油应清洁无沉淀。 2, each boot according to the lubrication chart for timing, fixed-point, quantitative lubricating oil, oil should be clean and no precipitation.3、机床必须经常保持清洁，未油漆的部分防锈油脂。 In 3
2、, the machine tools must be kept clean, not part of the antirust oil paint.4、电动机轴承内的润滑漾油要定期更换加注，并经常检查电器部分工作是否正常安全可靠。 In 4, motor bearing lubricating overflow oil should be changed regularly filling, and regularly check whether the normal work of safe and reliable electrical parts.5、定期检查三角皮带、手柄、旋钮、按键
3、是否损坏，磨损严重的应及时更换，并报备件补充。 In 5, regularly check the triangle belt, handle, knob, button is damaged, serious abrasion of the replacement should be timely, and offer spares supplement.6、定期检查修理开关、保险、手柄、保证其工作可靠。 6, regular inspection repair switch, insurance, handle, ensure the reliability of their work.待添加的隐藏文字内容37、每天下班前10分钟，对机床加油润滑及擦洗清洁机床。In 7, at the end of each day for 10 minutes, the machine tool lubrication and cleaning cleaning machine.8、严禁非指定人员操作该设备，平常必须做到人离机停。 8, no non designated personnel to operate the device, usually must be done from the machine stop.
