MAGNETIC PARTICLE TESTING.ppt

上传人:sccc 文档编号:5794718 上传时间:2023-08-20 格式:PPT 页数:38 大小:2.58MB
返回 下载 相关 举报
MAGNETIC PARTICLE TESTING.ppt_第1页
第1页 / 共38页
MAGNETIC PARTICLE TESTING.ppt_第2页
第2页 / 共38页
MAGNETIC PARTICLE TESTING.ppt_第3页
第3页 / 共38页
MAGNETIC PARTICLE TESTING.ppt_第4页
第4页 / 共38页
MAGNETIC PARTICLE TESTING.ppt_第5页
第5页 / 共38页
点击查看更多>>
资源描述

《MAGNETIC PARTICLE TESTING.ppt》由会员分享,可在线阅读,更多相关《MAGNETIC PARTICLE TESTING.ppt(38页珍藏版)》请在三一办公上搜索。

1、MAGNETIC PARTICLE TESTING,Introduction,This module is intended to present information on the widely used method of magnetic particle inspection.Magnetic particle inspection can detect both production discontinuities(seams,laps,grinding cracks and quenching cracks)and in-service damage(fatigue and ov

2、erload cracks).,Outline,Magnetism and Ferromagnetic MaterialsIntroduction of Magnetic Particle InspectionBasic Procedure and Important ConsiderationsComponent pre-cleaningIntroduction of magnetic fieldApplication of magnetic mediaInterpretation of magnetic particle indicationsExamples of MPI Indicat

3、ions,Magnetic lines of force around a bar magnet,Opposite poles attracting,Similar poles repelling,Introduction to Magnetism,Magnetism is the ability of matter to attract other matter to itself.Objects that possess the property of magnetism are said to be magnetic or magnetized and magnetic lines of

4、 force can be found in and around the objects.A magnetic pole is a point where the a magnetic line of force exits or enters a material.,Magnetic field lines:Form complete loops.Do not cross.Follow the path of least resistance.All have the same strength.Have a direction such that they cause poles to

5、attract or repel.,Ferromagnetic Materials,A material is considered ferromagnetic if it can be magnetized.Materials with a significant Iron,nickel or cobalt content are generally ferromagnetic.Ferromagnetic materials are made up of many regions in which the magnetic fields of atoms are aligned.These

6、regions are call magnetic domains.Magnetic domains point randomly in demagnetized material,but can be aligned using electrical current or an external magnetic field to magnetize the material.,S,N,How Does Magnetic Particle Inspection Work?,A ferromagnetic test specimen is magnetized with a strong ma

7、gnetic field created by a magnet or special equipment.If the specimen has a discontinuity,the discontinuity will interrupt the magnetic field flowing through the specimen and a leakage field will occur.,How Does Magnetic Particle Inspection Work?(Cont.),Finely milled iron particles coated with a dye

8、 pigment are applied to the test specimen.These particles are attracted to leakage fields and will cluster to form an indication directly over the discontinuity.This indication can be visually detected under proper lighting conditions.,Basic Procedure,Basic steps involved:Component pre-cleaningIntro

9、duction of magnetic fieldApplication of magnetic mediaInterpretation of magnetic particle indications,Pre-cleaning,When inspecting a test part with the magnetic particle method it is essential for the particles to have an unimpeded path for migration to both strong and weak leakage fields alike.The

10、parts surface should be clean and dry before inspection.Contaminants such as oil,grease,or scale may not only prevent particles from being attracted to leakage fields,they may also interfere with interpretation of indications.,Introduction of the Magnetic Field,The required magnetic field can be int

11、roduced into a component in a number of different ways.Using a permanent magnet or an electromagnet that contacts the test piece Flowing an electrical current through the specimenFlowing an electrical current through a coil of wire around the part or through a central conductor running near the part

12、.,Direction of the Magnetic Field,Two general types of magnetic fields(longitudinal and circular)may be established within the specimen.The type of magnetic field established is determined by the method used to magnetize the specimen.,A longitudinal magnetic field has magnetic lines of force that ru

13、n parallel to the long axis of the part.A circular magnetic field has magnetic lines of force that run circumferentially around the perimeter of a part.,Importance of Magnetic Field Direction,Being able to magnetize the part in two directions is important because the best detection of defects occurs

14、 when the lines of magnetic force are established at right angles to the longest dimension of the defect.This orientation creates the largest disruption of the magnetic field within the part and the greatest flux leakage at the surface of the part.An orientation of 45 to 90 degrees between the magne

15、tic field and the defect is necessary to form an indication.,Since defects may occur in various and unknown directions,each part is normally magnetized in two directions at right angles to each other.,Question,?From the previous slide regarding the optimum test sensitivity,which kinds of defect are

16、easily found in the images below?,Producing a Longitudinal Magnetic Field Using a Coil,A longitudinal magnetic field is usually established by placing the part near the inside or a coils annulus.This produces magnetic lines of force that are parallel to the long axis of the test part.,Coil on Wet Ho

17、rizontal Inspection Unit,Portable Coil,Producing a Longitudinal Field Using Permanent or Electromagnetic Magnets,Permanent magnets and electromagnetic yokes are also often used to produce a longitudinal magnetic field.The magnetic lines of force run from one pole to the other,and the poles are posit

18、ioned such that any flaws present run normal to these lines of force.,Circular Magnetic Fields,Circular magnetic fields are produced by passing current through the part or by placing the part in a strong circular magnet field.A headshot on a wet horizontal test unit and the use of prods are several

19、common methods of injecting current in a part to produce a circular magnetic field.Placing parts on a central conductors carrying high current is another way to produce the field.,Application of Magnetic Media(Wet Versus Dry),MPI can be performed using either dry particles,or particles suspended in

20、a liquid.With the dry method,the particles are lightly dusted on to the surface.With the wet method,the part is flooded with a solution carrying the particles.The dry method is more portable.The wet method is generally more sensitive since the liquid carrier gives the magnetic particles additional m

21、obility.,Dry Magnetic Particles,Magnetic particles come in a variety of colors.A color that produces a high level of contrast against the background should be used.,Wet Magnetic Particles,Wet particles are typically supplied as visible or fluorescent.Visible particles are viewed under normal white l

22、ight and fluorescent particles are viewed under black light.,Interpretation of Indications,After applying the magnetic field,indications that form must interpreted.This process requires that the inspector distinguish between relevant and non-relevant indications.,The following series of images depic

23、t relevant indications produced from a variety of components inspected with the magnetic particle method.,Crane Hook with Service Induced Crack,Fluorescent,Wet Particle Method,Gear with Service Induced Crack,Fluorescent,Wet Particle Method,Drive Shaft with Heat Treatment Induced Cracks,Fluorescent,W

24、et Particle Method,Splined Shaft with Service Induced Cracks,Fluorescent,Wet Particle Method,Threaded Shaft withService Induced Crack,Fluorescent,Wet Particle Method,Large Bolt with Service Induced Crack,Fluorescent,Wet Particle Method,Crank Shaft with Service Induced Crack Near Lube Hole,Fluorescen

25、t,Wet Particle Method,Lack of Fusion in SMAW Weld,Visible,Dry Powder Method,Indication,Toe Crack in SMAW Weld,Visible,Dry Powder Method,Throat and Toe Cracks in Partially Ground Weld,Visible,Dry Powder Method,Demagnetization,Parts inspected by the magnetic particle method may sometimes have an objec

26、tionable residual magnetic field that may interfere with subsequent manufacturing operations or service of the component.Possible reasons for demagnetization include:May interfere with welding and/or machining operationsCan effect gauges that are sensitive to magnetic fields if placed in close proxi

27、mity.Abrasive particles may adhere to components surface and cause and increase in wear to engines components,gears,bearings etc.,Demagnetization(Cont.),Demagnetization requires that the residual magnetic field is reversed and reduced by the inspector.This process will scramble the magnetic domains

28、and reduce the strength of the residual field to an acceptable level.,Advantages of Magnetic Particle Inspection,Can detect both surface and near sub-surface defects.Can inspect parts with irregular shapes easily.Precleaning of components is not as critical as it is for some other inspection methods

29、.Most contaminants within a flaw will not hinder flaw detectability.Fast method of inspection and indications are visible directly on the specimen surface.Considered low cost compared to many other NDT methods.Is a very portable inspection method especially when used with battery powered equipment.,

30、Limitations ofMagnetic Particle Inspection,Cannot inspect non-ferrous materials such as aluminum,magnesium or most stainless steels.Inspection of large parts may require use of equipment with special power requirements.Some parts may require removal of coating or plating to achieve desired inspectio

31、n sensitivity.Limited subsurface discontinuity detection capabilities.Maximum depth sensitivity is approximately 0.6”(under ideal conditions).Post cleaning,and post demagnetization is often necessary.Alignment between magnetic flux and defect is important,Glossary of Terms,Black Light:ultraviolet li

32、ght which is filtered to produce a wavelength of approximately 365 nanometers.Black light will cause certain materials to fluoresce.Central conductor:an electrically conductive bar usually made of copper used to introduce a circular magnetic field in to a test specimen.Coil:an electrical conductor s

33、uch a copper wire or cable that is wrapped in several or many loops that are brought close to one another to form a strong longitudinal magnetic field.,Glossary of Terms,Discontinuity:an interruption in the structure of the material such as a crack.Ferromagnetic:a material such as iron,nickel and co

34、balt or one of its alloys that is strongly attracted to a magnetic field.Heads:electrical contact pads on a wet horizontal magnetic particle inspection machine.The part to be inspected is clamped and held in place between the heads and shot of current is sent through the part from the heads to creat

35、e a circular magnetic field in the part.Leakage field:a disruption in the magnetic field.This disruption must extend to the surface of the part for particles to be attracted.,Glossary of Terms,Non-relevant indications:indications produced due to some intended design feature of a specimen such a keyw

36、ays,splines or press fits.Prods:two electrodes usually made of copper or aluminum that are used to introduce current in to a test part.This current in turn creates a circular magnetic field where each prod touches the part.(Similar in principal to a welding electrode and ground clamp).Relevant indic

37、ations:indications produced from something other than a design feature of a test specimen.Cracks,stringers,or laps are examples of relevant indications.,Glossary of Terms,Suspension:a bath created by mixing particles with either oil or water.Yoke:a horseshoe magnet used to create a longitudinal magnetic field.Yokes may be made from permanent magnets or electromagnets.,

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 建筑/施工/环境 > 农业报告


备案号:宁ICP备20000045号-2

经营许可证:宁B2-20210002

宁公网安备 64010402000987号