《【UL标准】UL 74522 Particular Requirements for Screwdrivers and Impact Wrenches.doc》由会员分享，可在线阅读，更多相关《【UL标准】UL 74522 Particular Requirements for Screwdrivers and Impact Wrenches.doc（16页珍藏版）》请在三一办公上搜索。
1、UL 745-2-2Particular Requirements for Screwdrivers and Impact WrenchesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULThis PDF Standard downloaded from JULY 16, 2007 UL 745-2-2tr1Underwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook
2、, IL 60062-2096UL Standard for Safety for Particular Requirements for Screwdrivers and Impact Wrenches, UL 745-2-2Second Edition, Dated July 16, 2007Summary of TopicsThis new Second edition was issued to clarify the UL effective date statement shown on the Preface page and to make other administrati
3、ve changes. The technical content of the First edition has been reproduced verbatim in this edition; the text of the standard has not been changed.As noted in the Commitment for Amendments statement located on the back side of the title page, UL and CSA are committed to updating this IEC-based binat
4、ional standard jointly. However, this Second edition dated July 16, 2007 will not be issued by CSA since it addresses UL only administrative changes.The UL Foreword is no longer located within the UL Standard. For information concerning the use and application of the requirements contained in this S
5、tandard, the current version of the UL Foreword is located on ULStandardsInfoNet at: The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or
6、if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All o
7、f ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical ph
8、otocopying, recording, or otherwise without prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either e
9、xpressed or implied, including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages a
10、rising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim.UL COPYRI
11、GHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULtr2JULY 16, 2007 UL 745-2-2This PDF Standard downloaded from UL will attempt to answer support requests concerning electronic versions of its Standards. However, this support service is offered on a reas
12、onable efforts basis only, and UL may not be able to resolve every support request. UL supports the electronic versions of its Standards only if they are used under the conditions and operating systems for which it is intended. ULs support policies may change from time-to-time without notification.U
13、L reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harm
14、less from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system.If a single-user version electronic Standard was
15、purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a multiple-user computer in such a manner that this Standard may only be accessed by one user at a time and for which there is no possi
16、bility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored on a single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranet server. The number of concurrent users shall not ex
17、ceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of an electronic Standard. Only one copy of th
18、e Standard may be printed for each authorized user of a multiple-user version of an electronic Standard. Because of differences in the computer/software/printer setup used by UL and those of electronic Standards purchasers, the printed copy obtained by a purchaser may not look exactly like the on-li
19、ne screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages being viewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figure
20、s, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals
21、 made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requirements with a specified future effective date, unless the applicant specifically requests that the product be judged under the current requirements. However, if the ap
22、plicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing, Recognized and Follow-Up Services after the effective date, and understanding of this should be signified in writing.Copyright 2007 Underwri
23、ters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:PageDate1-12 . July 16, 2007Canadian Standards AssociationCAN/CSA-C22.2 No. 745-2-2First EditionUnderwriters Laboratories Inc. UL 745-2-2Second EditionParticular Requirements for Screwdrivers and Impact W
24、renchesJuly 16, 2007UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULThis PDF Standard downloaded from Commitment for AmendmentsThis Standard is issued jointly by Canadian Standards Association and Underwriters Laboratories Incorporated. Amend
25、ments to this Standard will be made only after processing according to the Standards writing procedures by both Canadian Standards Association and Underwriters Laboratories Incorporated.ISBN 1-55397-485-9 2004Canadian Standards AssociationAll rights reserved. No part of this publication may be repro
26、duced in any form whatsoever without the prior permission of the publisher.Copyright 1995, 2007 Underwriters Laboratories Inc.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULJULY 16, 2007CAN/CSA-C22.2 NO. 745-2-2UL 745-2-211CONTENTSPreface .
27、.51 Scope . .72 Definition . .73 General requirement . .74 General notes on tests . .75 Rating . .76 Classification . .77 Marking . .88 Protection against electric shock . .89 Starting . .810 Input and current . .811 Heating . .812 Leakage current . .813 Radio and television interference suppression
28、 . .814 Moisture resistance . .815 Insulation resistance and electric strength . .816 Endurance . .917 Abnormal operation . .918 Mechanical hazards . .919 Mechanical strength . .920 Construction . .921 Internal wiring . .922 Components . .1023 Supply connection and external flexible cables and cords
29、 . .1024 Terminals for external conductors . .1025 Provision for earthing . .1026 Screws and connections . .1027 Creepage distances, clearances and distances through insulation . .1028 Resistance to heat, fire and tracking . .1029 Resistance to rusting . .1030 Tests by Manufacturer . .1031 Instructi
30、ons . .10This PDF Standard downloaded from Appendix A Thermal cut-outs and overload releasesAppendix B Electronic CircuitsAppendix C Construction of safety isolating transformers Appendix D Measurement of creepage distances and clearances Appendix E Reference standardsAppendix F Attachments and acce
31、ssoriesAppendix G Sequence of testsAppendix H TranslationsH1 Translations . .11H1.2 Instructions . .11PrefaceThis is the common CSA and UL Standard for portable electric drills. It is the first edition of CSA Standard C22.2 No. 745-2-2 Safety of portable electric tools Part 2: Particular requirement
32、s for Particular Requirements for Screwdrivers and Impact Wrenches and the second edition of UL 745-2-2 , Safety of portable electric tools Part 2: Particular requirements for Particular Requirements for Screwdrivers and Impact Wrenches. It is written in SI (metric) units.This Standard was prepared
33、by Canadian Standards Association and Underwriters Laboratories Inc. This common CSA and UL Standard is based on IEC Publication 745-2-2 (1982) Part 2: Particular Requirements for Screwdrivers and Impact Wrenches. Where Canadian and US deviations have necessitated the deletion of IEC Publication 745
34、-2-2 text, the IEC text has been retained but has been over-stricken to indicate it as nonmandatory. Text added to IEC Publication 745-2-2 as mandatory has been underlined including, where feasible, Tables and Figures.Where a particular clause of the general requirements Standard is not mentioned in
35、 this Standard, the clause applies as far as is reasonable. Where this edition states addition, modification, or replacement, the relevant requirement, test specification, or explanatory matter in the general requirements Standard should be adapted accordingly.If the functions of a tool are covered
36、by different particular Standards, the relevant particular requirements Standard is applied to each function separately, so far as is reasonable. If applicable, the influence of one function on the other is taken into account.This Standard was reviewed by the CSA Subcommittee on Portable Electric To
37、ols of the Technical Committee on Consumer and Commercial Products under the jurisdiction of the Standards Steering Committee on the Canadian Electrical Code, Part II, and was formally approved by these Committees.This Standard was processed and reviewed in accordance with the method of development,
38、 revision and implementation of UL Standards for safety.This Standard has been approved by the Standards Council of Canada as a National Standard of Canada. March 23, 1995UL Effective DateThe effective date for UL 745-2-2 is the date of publication.Revisions of this Standard will be made by issuing
39、revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice that accompanies the latest set of revised requirements. Comments or proposals for revisions on any part
40、of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at .CSA Effective DateThe effective date for CSA will be announced through a CSA Certification Notice.This PDF Standard downloaded from Note: A
