《75Ω多芯微型同轴电缆系列.docx》由会员分享，可在线阅读，更多相关《75Ω多芯微型同轴电缆系列.docx（10页珍藏版）》请在三一办公上搜索。
1、75多芯微型同轴电缆系列75 Multi Cores Micro Coaxial Cable Series应用传送视频、音频信号，无线电接收及发射信号的传送，数字程控交换机之间的连接Applications Transmit the video and audio frequency signals, the signal of the radio apparatus when it receives or sends, and used in the connection between digital program-controlled switching equipments.型号 T
2、ypeSYV-75-2-18, SYV-75-2-28, SYV-75-3-18, SYV-75-3-28结构 Structure超五类RJ45模块(Enhanced category 5 RJ45 modules) 超五类RJ45插座模块是根据国际标准ISO/IEC11801、TIA/EIA568设计制造的8线式插座模块，性能优异，可靠性好，配合面板使用，操作使用方便。 The enhanced category 5 RJ45 socket module is 8 strings Socket Modules designed and manufactured according to in
3、ternational standards ISO/IEC11801、 TIA/EIA568,and it is advantageous in excellent performances and reliability, convenient to use combined with panels.技术说明 （Technical descriptions）卡接簧片整体镀镍，可接线径0.40.6mm,卡接可重复次数200次The seizing reed nickeled entirely. Conductor diameter: 0.40.6mm. Repeatable times: 20
4、0接触电阻：正常大气压条件下 2.5mContact resistance ：Under the regular atmospheric pressure 2.5m绝缘电阻：正常大气压条件下 1000MInsulation resistance： Under the regular atmospheric pressure 1000M抗电强度：DC1000V（AC700V）1分钟无击穿和飞弧现象Dielectric breakdown strength：No breakdowns and flashovers in 1 minute, DC 1000V (AC 700V)电话插座模块(phon
5、e socket module)电话插座模块是用于语音通信的四芯接线模块，四芯 接触针整体镀金，可接单股和多股铜导线，长期使用接触可靠The phone socket module is four-core connection module used in speech communication. The connect pins gilded entirely. Connect single or multiple copper conductors.It is reliable for long-term use.2/3位地板插座（2/3 floor socket） 用于地面安装的插座
6、，内含1位强电插座，其余两位可安装超五类RJ45插座模块或四芯电话插座模块，铜质。 It is applied to ground installation including a strong electricity socket, while the other two could be used for enhanced cat.5e RJ 45 socket or four-core phone socket module. It is made of copper.双位桌面插座盒（Dibit tabletop socket case）可用于桌面和墙面安装的插座盒，内部可安装超五 类R
7、J45插座模块和四芯电话插座模块. It is used for tabletop and wall place installation, which could be installed enhanced cat.5e RJ45 socket module and four-core phone socket module inside.双位面板（Dibit panel）双位面板外形尺寸为：868615mm,带弹簧防尘门，可安装超五类RJ45插座模块和四芯电话插座模块The dimension of dibit panel with spring dustproof cover is 86
8、8615mm.It could be installed enhancedcat.5e RJ45 socket module and four-core phone socketmodule.六类接线模块(Category 6 wiring modules) 六类接线模块是根据国际标准ISO/IEC11801、TIA/ EIA568B设计制造的8线式插座模块，性能优异，可靠性好，配合面板使用，操作使用方便。The Category 6 connection module is 8 strings Socket modules, designed and manufactured accordi
9、ng to the international standards ISO/IEC11801, TIA/EIA568B, and it is advantageous in excellent performances and reliability, convenient to use combined with panels.超五类25对接线模块(Enhanced category 5 connection modules of 25 pairs)超五类25对接线模块是依据国际标准ISO/IEC11801、TIA/EIA-TSB-40设计制造的UTP电缆用高频接线模块，每个模块容量25回线
10、。Enhanced category 5 connection modules of 25 pairs are high frequency connection module for UTP cable, which is designed and manufactured according to the international standards ISO/IEC11801, TIA/EIA-TSB-40.技术说明（Technical descriptions）簧片镀银可接线径0.40.6mm,卡接可重复次数200次。Reed silvering. Conductor diameter
11、 0.4 0.6mm. Repeatable times: 200接触电阻：正常大气压条件下 2.5mContact resistance ：Under the regular atmospheric pressure 2.5m绝缘电阻：正常大气压条件下 1000MInsulation resistance： Under the regular atmospheric pressure 1000M抗电强度：DC1000V（AC700V）1分钟无击穿和飞弧现象Dielectric breakdown strength：No breakdowns and flashovers in 1 minut
12、e, DC 1000V (AC 700V)频率 frequency MHz衰减 attenuation dB近端串音衰减 NEXT dB标准 standard实际 actual标准 standard实际 actual1.00.10.0065.086.84.00.10.0065.075.710.00.10.0063.067.416.00.20.0158.963.520.00.20.0157.061.331.250.20.0153.156.162.50.30.0647.150.0100.00.40.1643.048.1卡线块(Wire fixture)4对卡线块 5对卡线块110系列卡接模块是根据
13、国际标准ISO/IEC11801、TIA/EIA-TSB-40设计制造的UTP电缆用卡接模块，性能达到5e类标准。110 Series fixtures are designed and manufactured for UTP cable according to international standards ISO/IEC11801, TIA/EIA-TSB-40. Its performances meet the specifications of Cat.5e.19机柜用100对配线架（100-pair Distribution Frame for 19cabinet）19机柜用1
14、00对配线架（110）是卡接模块的安装架，用于19标准机柜内的安装，占用机柜空间为1U（44.45mm）。100-pair distribution frame for 19cabinet is mounting rack for fixtures, which is used for 19standard cabinet and occupies 1U (44.45mm).110系列50/100对配线架（110 series 50-pair /100-pair Distribution Frame）110系列50/100对配线架是卡接模块的安装架，用于墙面小容量转接点，中间配线箱，多媒体设备
15、箱等场合。110 series 50-pair/100-pair distribution frame is mounting rack for fixtures，which is used for small capacity transit point on walls, middle distribution cabinet and multimedia equipment box and so on. 50/100/125对背装架（50-pair /100-pair /125-pair back rack）背装架是超五类25对接线模块的安装架，主要用于墙面小容量转接点、中间配线箱、多媒
16、体设备箱等应用场合，分别可安装2、4、5条25对接线模块。It is mounting rack for 25 pairs enhanced category 5 connection module，which is used for small capacity transit point on walls, middle distribution cabinet and multimedia equipment box and so on. 2,4,and 5 connection modules could be installed respectively.超五类12/18/24/48
17、位接线板（enhanced category 5 12/18/24/48 patch panel）超五类12/18/24/48位接线板是机柜用配线盘，可替代25对接线模块和110系列卡接模块作为快速插接使用，背后可安装理线架进行线缆管理。It is a kind of patch panel used for cabinet, which could be used for quick inlay graft replacing the 25-pair connection module and 110 series wire fixture and manage cables by mean
18、s of install a clean-up rack.19机柜（19cabinet）根据容量和大小的不同，普天公司备有各种配线柜可供选择，具体见下表，每个配线柜中均安装有24个高速风扇，一个电源插板，一个托板。其中可安装的设备有： 100/150对背装架； 100对配线架； 超五类12/18/24/48位接线板； 12/48端口光纤分线盒； HUB、交换机等有源设备。可安装的选件有： 管理线盘； 1U空面板；3U空面板； 托板。According to the capacity and dimension, PUTIAN HOUMA have various types of cabine
19、t to be selected as shown in the following table. Each cabinet has 24 high speed fans, a power plug and a backing plate. The equipments that could be installed are: 100-pair /150-pair back rack; 100-pair distribution frame; Enhanced category 5 12/18/24/48 patch panel; 12/48 optical fiber junction bo
20、x at terminal port;Active equipments such as HUB, exchangers.The options are:Management wire carrier; 1U blank panel,3U bland panel; backing plate.容量 capacity尺寸 dimension (mm)20U100060060020U100060070024U120060060024U120060070028U140060060028U140060070033U160060060033U160060070037U180060060037U18006
21、0070042U200060060042U200060070019配线柜用选件（Options for 19cabinet）管理线盘(Management wire carrier)用于19机柜中跳线的管理，使之整齐有序。It is used to put the jumpers into order in 19cabinet.1U/3U空面板（1U/3U blank panel）用于19配线架柜中，安装在暂时未使用的位置，使配线柜整齐美观，扩容时可将其换去。It is used to make the cabinet orderly and installed in the position
22、 unused temporarily. It could be replaced when dilation needed. 托板（backing plate）安装在19配线柜中，用于放置HUB、交换机等有源设备。It is installed in 19cabinet used to put active equipments such as HUB, exchanger etc.光纤系列 (Series for Optical fiber )12/24端口光纤分线盒(12/24s junction box at terminal port)用于光纤接入网中配线光缆与用户的接口设备，可以实
23、现光缆纤芯的熔接存储、线路分支等功能。It is used for the optical fiber access network distribution optical cable connected with the interface device of consumer. It is functional in fusion splicing, storage of optical fiber and line branching.室外光纤配线箱（Distribution cabinet for optical fiber outside）用于光纤接入网终端，具有光纤的配线和熔接功
24、能，可以实现光缆纤芯的灵活调线及存储，最大容量为48芯。It is used for terminal ends of the optical fiber access network. It has the functions of distribution and fusion splicing of optical fiber.It could realize the flexible blending and storage.Max. capacity is 48 cores.19机柜用12/48端口光纤分线盒(12/48s junction box at terminal port
25、for 19cabinet）用于212或248口光纤系统的分线配线，可安装在19机柜中。It is used for distribution of 212 or 248 core optical fiber system. It could be placed in 19cabinet.光纤适配器 (Optical fiber adapters)ST适配器 (ST adapter) SC适配器(SC adapter) FC适配器 (FC adapter)光纤跳线（optical fiber jumper wire）ST/PC-ST/PC SC/PC-SC/PCFC/PC-ST/PC ST/PC-SC/PC电缆跳线 (cable jumper wire)RJ45-RJ45 MODULE-MODULE
