《【BS英国标准word原稿】BS EN 125721999 Artificial climbing structures – Protection points, stability .doc》由会员分享，可在线阅读，更多相关《【BS英国标准word原稿】BS EN 125721999 Artificial climbing structures – Protection points, stability .doc（19页珍藏版）》请在三一办公上搜索。
1、 ，如果你需要更多标准可以到 如果你购买的文档存在缺页、字迹模糊、乱码等情况，请大家通过论坛消息与我联系。BRITISH STANDARDArtificial climbing structures Protection points, stability requirements and test methodsThe European Standard EN 12572:1998 has the status of aBritish StandardICS 97.220.10| BS EN12572:1999|NO COPYING WITHOUT BSI PERMISSION EXCEPT
2、 AS PERMITTED BY COPYRIGHT LAWBS EN 12572:1999National forewordThis British Standard is the English language version of EN 12572:1998.The UK participation in its preparation was entrusted by Technical Committee SW/136, Sports, playground and other recreational equipment, to Subcommittee SW/136/9, Ar
3、tificial climbing walls, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and
4、promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under t
5、he section entitled International Standards Correspondence Index, or by using theFind facility of the BSI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application
6、.Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover.Amd. No.DateText affectedThis British Standard, having been prepared under the
7、 direction of the Consumer Products and Services Sector Committee, was published under the authority of the StandardsCommittee and comes into effect on 15 May 1999BSI 05-1999ISBN 0 580 32053 7Amendments issued since publicationEUROPEAN STANDARDEN 12572NORME EUROPE ENNEEUROPA ISCHE NORMDecember 1998I
8、CS 97.220.10Descriptors: sports, sport equipment, artificial climbing structures, specifications, safety, accident prevention, tests, static loads, break ing loads, mechanical strength, stability, marking, technical noticesEnglish versionArtificial climbing structures Protection points, stability re
9、quirements and test methodsStructures artificielles descalade Points dassurage, exigences de stabilite et me thodes dessaiKu nstliche Kletteranlagen Sicherungspunkte, Anforderungen an die Stabilita t und Pru fverfahrenThis European Standard was approved by CEN on 5 December 1998.CEN members are boun
10、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Ce
11、ntral Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as
12、 the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENEuropean Committee for Standardiza
13、tion Comite Europe en de Normalisation Europa isches Komitee fu r NormungCentral Secretariat: rue de Stassart 36, B-1050 Brussels1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nationalMembers.Ref. No. EN 12572:1998 EPage 9EN 12572:1998BSI 05-1999ForewordT
14、his European Standard has been prepared byTechnical Committee CEN/TC 136, Sports, playgroundContentsPageand other recreational equipment, the Secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by
15、endorsement, at the latest by June 1999, and conflicting national standards shall be withdrawn atthe latest by June 1999.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
16、 Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Foreword 21Scope 32Normative references 33Definitions 34Requirements 55Marking 76Instruction manual 87Conformity of ACS8An
17、nex A (normative) Calculations9Annex B (normative) Laboratory tests 9Annex C (normative) Impact test of surfaceelements 9Annex D (normative) Proof testing 101 ScopeThis standard specifies the requirements and tests relating only to the protection points and the stability for artificial climbing stru
18、ctures (hereafter referred to as ACS). This standard does not apply to the surrounding area.This standard is applicable when an ACS is in normal use and relates especially to the techniques and protection methods used during progress on the structure.This standard is not applicable to playground equ
19、ipment (see EN 1176-1 to EN 1176-7).2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references
20、, subsequent amendments to or revisions of any of these publications apply to this European Standard onlywhen incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies.EN 1176-1, Playground equipment Part 1: General safety requirem
21、ents and test methods.EN 1176-2, Playground equipment Part 2: Additional specific safety requirements and test methods for swings.EN 1176-3, Playground equipment Part 3: Additional specific safety requirements and test methods for slides.EN 1176-4, Playground equipment Part 4: Additional specific sa
22、fety requirements and test methods for runways.EN 1176-5, Playground equipment Part 5: Additional specific safety requirements and test methods for carousels.EN 1176-6, Playground equipment Part 6: Additional specific safety requirements and test methods for rocking equipment.EN 1176-7, Playground e
23、quipment Part 7: Guidance on installation, inspection, maintenance and operation.3 DefinitionsFor the purposes of this standard, the following definitions apply.3.1artificial climbing structure (ACS)sports equipment consisting of a purpose-built climbing structure, which displays different construct
24、ion characteristics, and is designed for different use objectives and not reserved for a particular age group3.2protection pointattachment point on the ACS designed to protect the climber. This protection point can be used during progress on the ACS. It can be fixed or movable3.3individual protectio
25、n pointprotection point used to safeguard a climber in his/her progress on the ACS3.4individual top rope systemprotection system which is fixed at the top of the climbing section and which is designed to take the rope for one climber3.5collective top rope systemprotection system which is fixed at th
26、e top of the climbing sections and which is designed to take the ropes of several climbers at once3.6individual ground protection pointanchoring point which is fixed to the ground at the base of the ACS, and which is designed either to secure a belayer controlling the rope of a lead-climber or as a
27、ground anchor for a self belaying system or as a fixing point for a protection system3.7collective ground protection systemprotection system which is fixed to the ground at the base of the ACS, and which is designed to secure belayers controlling the ropes of lead-climbers, or as a ground anchor for
28、 self belaying systems3.8 stanceposition on the ACS constituted by either a single point or two points linked together where the climber can stop, protect him/herself and his/her fellow climber who can join him/her before continuing the climb from the stance3.9 spanpart of a collective top rope syst
29、em measured between two consecutive supports or attachments (seeFigure D.2)3.10climbing sectionpart of the surface of an ACS defined by two vertical planes (see Figure 1)3.11nominal loadmaximum load that can be generated in normal useDimensions in millimetresa) b)1Climbing section2Width of the route
30、V1, V2 Vertical planesH1 Horizontal planeH0 Horizontal plane of the groundFigure 1 Climbing section4 Requirements4.1 Layout and placement of individual protection pointsThe maximum distance, x, for the placement of the individual protection point which follows the point situated at the height of h (
31、see Figure 2) shall be determined by using formula (1).x = (h + 2,0)5where(1)If there are protection points, the maximum of the first point shall not exceed 3,10 m.For removable protection points, the maximum distance shall be measured from centre to centre ofthe implantation points at 908 to the su
32、rface of the ACS (see Figures 2c and 2d).4.2 Geometrical requirementsAll protection points and stance points with the exception of those located at the top of the climbing sections shall be in accordance with Figure 3.h is the distance between the point and the ground or an obstacle, whichever is th
33、e closest, measured vertically, in metres, beneath the point in all cases.For permanent protection points, the maximum distance shall be measured from the lowest internal point of the attachment point (see Figure 2c).The bar or device over or through which the rope passes in either a collective or i
34、ndividual top rope system shall be rounded in accordance with Figure 4.a) b)c) d) 1 Reference point for measurementFigure 2 Layout and placement of protection pointsDimensions in millimetresFigure 3 Protrusion of individual protection pointDimensions in millimetresFigure 4 Rounding of parts4.3 Stren
35、gth of the components of the ACSThe strength of the components of the ACS shall be justified by one of the following methods:a) by calculation using the calculation loads of Table 1 in accordance with annex A and Figures 5 and 6;b) if a) is not possible, by laboratory breaking tests in accordance wi
36、th annex B.When tested in accordance with annex B, there shall be no breakage or tearing of the elements.Figure 5 Placement of the calculation loads on collective top rope systemFigure 6 Placement of the loads on collective ground protection systemsTable 1 LoadsNominal load(kN)Proof test load(kN)Cal
37、culation load*)(kN)Calculation load*)stability(kN)Minimum breaking load*)(kN)Normal load of a climberLoad produced by a climbing team on an individual top rope systemLoad produced by a climbing team on a ground protection point0,82,51,4 1,23,82,11,2*)3,8 Individual protection pointIndividual top rop
38、e systemCollective top rope systemAnchor for stance designed with one protection pointAnchor for linked stance designed with more than one protection point linked togetherIndividual ground protection pointCollective ground protection system6,68,010,010,020,06,68,010,03,820,0(n-1) 2,5 + 6,68,0(n-1) 3
39、,8 + 10,0*)(n-1) 3,8 + 10,0(n-1) 7,5 + 20,012,08,018,018,036,06,68,010,010,020,04,04,0612,0(n-1) 1,4 + 4,04,0(n-1) 2,1 + 6,0*)(n-1) 4,2 + 2,0*) nominal load multiplied by a factor of 1,5 before applying any other industrial weighting coefficient*) for ACS without protection points*) for the collecti
40、ve top rope system the loads are applied throughout each span as shown by annex D*) only use during test carried out in accordance with annex Bn: number of climbing sections on a spanBased on experiments it is impossible to have two or more climbers create a peak impact force simultaneously due to a
41、 fall. NOTE The proof testing only acts as a verification of good installation practice and cannot replace the calculations.4.4 Impact test of surface elementsWhen tested in accordance with annex C, there shall be no breaking or splitting of the surface element.4.5 Proof testingWhen tested in accord
42、ance with annex D, there shall be no breaking, tearing or destruction of the elements after testing.5 MarkingAll ACS shall be marked in a clearly visible place with a notice comprising of:a) the name or trademark of the manufacturer;b) the name of importer or supplier;c) the name of the installer;d)
43、 the purpose of this equipment;e) the date of proof testing;f) the maximum number of climbers on the ACS;g) if an ACS is not calculated to allow the placement of protection points (individual, collective or stance) this shall be mentioned;h) the maximum number of climbing sections useable simultaneously.
