《BS英国标准BS EN 50288322003 用于模拟和数字通信和控制的多元件金属电缆.第32部分达100MHZ的非屏蔽电缆的分规范.工作区域和软线.doc》由会员分享，可在线阅读，更多相关《BS英国标准BS EN 50288322003 用于模拟和数字通信和控制的多元件金属电缆.第32部分达100MHZ的非屏蔽电缆的分规范.工作区域和软线.doc（13页珍藏版）》请在三一办公上搜索。
1、BRITISH STANDARD BS EN50288-3-2:2003Multi-element metallic cables used in analogue and digital communication and control Part 3-2: Sectional specification for unscreened cables characterised up to100 MHz Work area and patch cord cablesThe European Standard EN 50288-3-2:2003 has the status of aBritis
2、h StandardICS 33.120.20 BS EN 50288-3-2:2003National forewordThis British Standard is the official English language version ofEN 50288-3-2:2003. It supersedes BS EN 50288-3-2:2001 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires, w
3、aveguides, R.F. connectors, R.F. and microwave passive components and accessories, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to:aid enquirers to understand the text;present to the responsible international/European committee any enquiries on the interpretation, or
4、proposals for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement in
5、ternational or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not pu
6、rport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Com
7、mittee on15 January 2004 BSI 15 January 2004ISBN 0 580 43247 5Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amd. No.DateCom
8、mentsAmendments issued since publicationEUROPEAN STANDARD EN 50288-3-2 NORME EUROPENNE EUROPISCHE NORM December 2003 ICS 33.120.20 Supersedes EN 50288-3-2:2001 English version Multi-element metallic cables used in analogue and digital communication and controlPart 3-2: Sectional specification for un
9、screened cables characterised up to 100 MHz -Work area and patch cord cablesCbles mtalliques lments multiples utiliss pour les transmissions et les commandes analogiques et numriques Partie 3-2: Spcification intermdiaire pour les cbles non blinds pour applications jusqu 100 MHz - Cbles de zone de tr
10、avail et de brassage Mehradrige metallische Daten- und Kontrollkabel fr analoge und digitale bertragung Teil 3-2: Rahmenspezifikation fr ungeschirmte Kabel bis 100 MHz - Gerteanschlusskabel und Schaltkabel This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to com
11、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Se
12、cretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status a
13、s the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland an
14、d United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by a
15、ny means reserved worldwide for CENELEC members. Ref. No. EN 50288-3-2:2003 E 9 EN 50288-3-2:2003 ForewordThis European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data communication cables, of Technical Committee CENELEC TC 46X, Communication cables. The text of the draft was su
16、bmitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50288-3-2 on 2003-10-01. This European Standard supersedes EN 50288-3-2:2001 The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national stan
17、dard or by endorsement (dop) 2004-10-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-10-01 This Part 3-2 is to be read in conjunction to EN 50288-1. Contents Page1Scope . 42Normative references . 43Definitions . 44Cable construction . 44.1Cond
18、uctor . 44.2Insulation . 54.3Cabling elements . 54.4Identification of cabling elements . 54.5Screening of cabling elements . 54.6Cable make-up . 54.7Filling compound . 54.8Interstitial fillers . 54.9Screening of the cable core . 54.10 Moisture barriers . 54.11 W rapping layers . 54.12 Sheath . 55Tes
19、ts and requirements for completed cables. 65.1Electrical tests . 65.2Mechanical tests . 85.3Environmental tests . 95.4Fire performance tests . 9 1ScopeThis sectional specification covers unscreened cables, characterised up to 100 MHz, to be used as work area cables to connect a telecommunications ou
20、tlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling
21、systems. The electrical, mechanical, transmission and environmental performance characteristics of the unscreened cables, related to their reference test methods, are detailed. This sectional specification is to be read in conjunction with EN 50288-1 which contains the essential provisions for its a
22、pplication. 2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the cited publications are listed hereafter. For dated references, subsequent amendme
23、nts to or revisions of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the cited publication applies, together with any amendments. EN 50173 Information technology - Generic cabling systems EN 502
24、88-1 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification EN 50289 Series Communication cables - Specifications for test methods EN 50290 Series Communication cables IEC 60189-2 Low-frequency cables and wires with PVC insulation and PVC
25、 sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations 3DefinitionsFor the purposes of this European Standard the definitions of EN 50288-1 apply. 4Cable construction4.1ConductorThe conductor shall be solid or stranded copper and meet the requirements of 4.1 of EN
26、50288-1. The stranded conductor shall consist of seven wires each with a nominal diameter of 0,12 mm to 0,21 mm. The solid conductor nominal diameter shall be 0,4 mm to 0,8 mm. The conductor shall be plain or metal coated. 4.2InsulationThe insulation shall be of a suitable material according to the
27、relevant part of EN 50290-2. 4.3Cabling elementsThe cable element shall be a pair or a quad. 4.4Identification of cabling elementsUnless otherwise specified, the colour coding for identification is given in IEC 60189-2. The colours shall meet the requirements of 4.4 of EN 50288-1. 4.5Screening of ca
28、bling elementsNot applicable 4.6Cable make-upThe cable elements shall be laid up in concentric layer(s) or units to form the cable core. 4.7Filling compoundNot applicable 4.8Interstitial fillersWhere fillers are used they shall meet the requirements of 4.8 of EN 50288-1. 4.9Screening of the cable co
29、reNot applicable 4.10 Moisture barriersNot applicable 4.11 Wrapping layersWhere wrapping layers are used they shall be in accordance with 4.11 of EN 50288-1 4.12 SheathThe sheath shall be of a suitable material according to the relevant part of EN 50290-2. 5Tests and requirements for completed cable
30、sThe following tables give the tests to be applied, together with the respective limits, in order to demonstrate compliance with this specification. 5.1Electrical tests5.1.1Low-frequency and d.c. electrical measurementsEN 50288-1Subclause no.ParameterRequirement5.1.1.1 Conductor loop resistance 29,0
31、 /100 m 5.1.1.2 Conductor resistance unbalance 2,0 % 5.1.1.3Dielectric strength conductor/conductor 1,0 kV d.c. or 0,7 kV a.c. for 1 min or 2,5 kV d.c. or 1,7 kV a.c. for 2 s 5.1.1.4Insulation resistance 500 M.km using 100 V - 500 V test voltage 5.1.1.5 Mutual capacitance No requirement specified 5.
32、1.1.6 Capacitance unbalance to earth 1 600 pF/km 1 4 101620 31,25 62,5 100 MHz 3,2 6,0 9,5 12,113,617,124,832,0 dB/100 m 1 4 101620 31,25 62,5 100 MHz 65,056,350,347,345,842,938,435,3 dB 5.1.2High-frequency electrical and transmission measurementsEN 50288-1Subclause no.Parameter Requirement5.1.2.1Ve
33、locity of propagation Phase delay 534+36/f ns/100 m, 1 MHz f 100 MHz 5.1.2.2Propagation delay difference (skew) 40 ns/100 m at 100 MHz 5.1.2.3Longitudinal attenuation2) 3) 4) ( 1,5 (1,9108f+0,0222f+0,2/f), 1 MHz f 100 MHz 5.1.2.5Near-end crosstalk (NEXT) 1) 2) 65,3-15log(f) 1 MHz f 100 MHz 4 8 10162
34、0 31,25 62,5 100 MHz 23,1 24,5 25,0 25,0 25,0 23,6 21,5 20,1dB 1 4 101620 31,25 62,5 100 MHz 60,848,840,836,734,830,924,920,8 dB 1 4 101620 31,25 62,5 100 MHz 63,851,843,839,737,833,927,923,8 dB 1 4 101620 31,25 62,5 100 MHz 62,353,347,344,242,839,935,432,3 dB EN 50288-1Subclause no.Parameter Requir
35、ement5.1.2.7.1 Power sum near-end crosstalk (PSNEXT) 2) 62,3-15log(f), 1 MHz f 100 MHz 5.1.2.6 Equal level far-end crosstalk 2) (ELFEXT) 63,8-20log(f), 1 MHzf100 MHz; values referenced to 100 m 5.1.2.7.2 Power sum equal level far-end crosstalk 2) (PSELFEXT) 60,8-20log(f), 1 MHzf100 MHz; values refer
36、enced to 100 m 5.1.2.8Mean characteristic impedance 100 5 , 120 5 , at 100 MHz f.f.s 5.1.2.9Return loss 5) 20+5log(f), 4 MHz f 10 MHz; 25dB, 10 MHz f 20 MHz; 25-7log (f/20), 20 MHz f 100 MHz; f.f.s 5.1.2.4Near-end unbalance attenuation 40-10log(f) dB, 1 MHz f 100 MHz; f.f.s 5.1.2.10Coupling attenuation 40 dB, 30 MHz f 100 MHz; f.f.s 40-20log(f/100) dB, 100 MHz f 1 000MHz f.f.s 1) For hybrid and multi-unit cables and cables, PSNEXT between all non fibre recognised cable units shall be 3 dB better than the specified pair to pair NEXT at all specified frequencies. 2) The value
