《【BS英国标准】BS EN 1347322001 Reinforcement. Specifications for multiaxial multiply fabrics. M.doc》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 1347322001 Reinforcement. Specifications for multiaxial multiply fabrics. M.doc（11页珍藏版）》请在三一办公上搜索。
1、Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN13473-2:2001Reinforcement Specifications for multi-axial multi-ply fabrics Part 2: Methods of test and general requirementsThe European Standard 13473-2:2001 has the status
2、 of aBritish StandardICS 59.100.99; 83.120NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 13473-2:2001National forewordThis British Standard is the official English language version ofEN 13473-2:2001.The UK participation in its preparation was entrusted to Technical Commi
3、ttee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to:aid enquirers to understand the text;present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related inter
4、national and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in
5、 the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
6、responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIThis British Standard, having been prepared under the direc
7、tion of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on15 August 2001 BSI 07-2001ISBN 0 580 37759 8Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,pages 2 to 7 and
8、a back cover.The BSI copyright date displayed in this document indicates when the document was last issued.Amd. No.DateCommentsAmendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 13473-2June 2001ICS 59.100.99; 83.120English versionReinforcement - Specifications for
9、multi-axial multi-ply fabrics - Part 2: Methods of test and general requirementsRenfort - Spcifications pour les tissus multi-axiaux multicouches - Partie 2: Mthodes dessai et exigences gnralesVerstrkungen - Spezifikation fr Multiaxialgelege - Teil 2: Prfverfahren und allgemeine Produktanforderungen
10、This European Standard was approved by CEN on 10 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
11、es concerning such national standards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its
12、 own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sw
13、eden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, U
14、ncontrolled Copy, (c) BSI 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 13473-2:2001 EPage 7EN 13473-2:2001Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIContentsPageF
15、oreword .31Scope .42Normative references .43Terms and definitions.44List of physical properties .45General requirements .55.1Appearance.55.2Packaging .65.3Labelling .6Bibliography .7Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIForewordThis
16、 European Standard has been prepared by Technical Committee CEN/TC 249 Plastics, the secretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2001, and conflict
17、ing national standards shall be withdrawn at the latest by December 2001.This standard is one part of EN 13473, Reinforcement - Specifications for multi-axial multi-ply fabrics which is constructed as follows: Part 1: Designation Part 2: Methods of test and general requirements Part 3: Specific requ
18、irementsThis standard includes a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Irelan
19、d, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI1ScopeThis Part 2 of EN 13473 defines the test methods to be used to determine the designat
20、ed and specified properties given in Parts 1 and 3 respectively.Part 2 of EN 13473 defines the general requirements applicable to the specification of all types of multi-axial multi- ply fabrics falling within the scope of this specification as defined in Part 1 of this standard.2Normative reference
21、sThis European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these pu
22、blications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).EN 13473-1, Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation
23、EN ISO 527-4, Plastics Determination of tensile properties Part 4: Test conditions for iso-tropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)EN ISO 3344, Reinforcement products Determination of moisture content (ISO 3344:1997) EN ISO 10548, Carbon fibre Determination of size
24、 content (ISO 10548:1994)ISO 472, Plastics VocabularyISO 1887, Textile glass - Determination of combustible-matter contentISO 1888, Textile glass - Staple fibres or filaments - Determination of average diameterISO 3374, Reinforcement products - Mats and fabrics - Determination of mass per unit areaI
25、SO 4603, Textile glass - Woven fabrics - Determination of thicknessISO 5025, Reinforcement products - Woven fabrics - Determination of width and lengthISO 11567, Carbon fibre - Determination of filament diameter and cross-sectional area3Terms and definitionsFor the purposes of this European Standard
26、, the following definitions given in ISO 472 and EN 13473-1 apply.4List of physical propertiesThe list of physical properties with the applicable test method shall be considered as a guide for the selection of the properties and limits which result of technical specifications of the application.Lice
27、nsed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSITable 1 List of test methodsPropertiesTest methods according toRemarksLoss on ignitionISO 1887for multi-axial multi-ply fabrics made out of glass fibres onlySize contentEN ISO 10548for multi-axial m
28、ulti-ply fabrics made out of carbon/aramid fibresMoisture contentEN ISO 3344for multi-axial multi-ply fabrics made out of glass/carbon/aramid fibresFilament diameterISO 1888for multi-axial multi-ply fabrics made out of glass fibre for designation onlyFilament diameterISO 11567for multi-axial multi-p
29、ly fabrics made out of carbon/aramid fibres for designation onlyMass per unit areaISO 3374for special multi-axial multi-ply fabrics, e.g. fabrics easily going out of shape, special arrangements shall be madeLength & widthISO 5025Fabric thicknessISO 4603Mechanical properties of laminateEN ISO 527-4I.
30、Material parameters derived from composite tests of different reinforcement textiles, e.g. woven fabrics and multi- axial multi-ply fabrics, only then can be consulted for the comparison of the reinforcement textiles, if the composite samples are produced with the same number, orientation, stacking
31、sequence and the same area weight of the reinforcement thread plies and furthermore tested in the same directions according to the composite sample construction. The use of the same resin type and the corresponding processing are obligatory.II.An exact description of the construction of the composit
32、e samples has to be secured at the time of their production.III. It is recommended to use only sample type 3 described inEN ISO 527-4 with a width b=b1 of 50 0,5 mm.5General requirements5.1AppearanceThe multi-axial multi-ply reinforcement fabric have to be substantially free from contamination (e. g
33、. oil, dirt, etc.)and shall not contain unacceptable levels of other faults (see Table 2 below).On the basis of the defect classification according to Table 2, the total number of defects by points shall not exceed20 per 100 m2 with a maximum of 3 major defects. Major defects shall be counted 2 poin
34、ts, minor defects 1 point. A maximum of 2 defect points shall be counted per square meter, even if several defects occur simultaneously. If required the product specification shall define alternative acceptance levels.Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Un
35、controlled Copy, (c) BSITable 2 List of defectsDefectDescriptionAcceptance levelMajor defectMinor defect1Ply construction1.1 Broken or missing thread0-thread:1 missing thread2 or more contiguous missing threads -thread:5 or more contiguous missing threadsX XX1.2 Lane without broken or missing thread
36、 (right-angled measured to thread direction)5.10 mm 10 mmXX2Binding system2.1 Broken single yarn ( 300 mm) in loop systemfor multi-axial multi-ply constructions with 0-threads on fabric surfacefor other multi-axial multi-ply constructionsXX3Multi-axial multi-ply fabric3.1 Cuts, tearsdefects greater
37、than 10 mmX3.2 Dirty spots or stainswidth and length less than 50 mmwidth and length equal and greater than 50 mmXX3.3 Deviation of widthwidth beyond specific tolerances (see EN 13473-3)X3.4 FoldsX5.2PackagingThe packaging shall protect the product during handling, storage and transportation.5.3Labe
38、llingEach package shall be identified with :5.3.1Designation code (see EN 13473-1).5.3.2Total mass per unit area including ply construction and binding system.5.3.3Width.5.3.4Length.5.3.5Weight of multi-axial multi-ply fabric package (net).5.3.6Defect designation.5.3.7Any special handling/storage in
39、structions.5.3.8Manufacturers production and traceability reference.Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIBibliographyEN ISO 527-1, Plastics Determination of tensile properties Part 1: General principals (ISO 527-1:1993 includingCor
40、r. 1:1994)EN ISO 1886, Reinforcement fibres Sampling plans applicable to received batches (ISO 1886:1990) ISO 1043-2, Plastics - Symbols - Part 2: Fillers and reinforcing materialsISO 4921, Knitting - Basic concepts VocabularyLicensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:43:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSIBS EN13473-2:2001BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparingBritish Standards. It presents the UK view on standards in Europe and at the internatio
